HOME
cs1

CS1 SERIES SPLICE KIT

11800/11900

PRODUCT FAMILY

Load cell cable splice kit. up to 6 lines and shield. Simply strip back the sheathing and solder the conductors to the circuit card. Tighten the strain relief hubs, and apply the resin potting (provided). Once it has set up, you have a permanent splice.

Available with 3/8" hubs or 1/2"

ORDER:

11800: 3/8" HUBS

11900: 1/2" HUBS

MINISPLICE

MINI-SPLICE

12000 PRODUCT FAMILY

Reusable load cell cable splice kit. Up to 4 lines and shield. Can be permanent or temporary. Nema 4X plastic enclosure with 1/4 inch strain relief hubs.

ORDER:

12000

CS3

SINGLE CELL SPLICE KIT

12100/12200 PRODUCT FAMILY

Reusable load cell cable splice kit. Up to 6 lines and shield. Can be permanent or temporary. Wet location plastic enclosure. Available with 3/8" or 1/2" strain relief hubs.

ORDER:

12100:3/8" HUBS

12200:1/2" HUBS

 

CS5

GC-S1

12300 PRODUCT FAMILY

Reusable load cell cable splice kit. Up to 6 lines and shield. Water tight and can be permanent or temporary. Strip cable sheathing and connect conductors to the terminal block (provided) and then close the enclosure. The internal gell forms a water tight seal.

ORDER:

12300

CS4

777 SPLICE KIT

12400 PRODUCT FAMILY

Reusable load cell cable splice kit. Up to 4 lines and shield. Can be permanent or temporary.

Compact design allows easy access and superior water and dust contamination prevention.

RATED IP68 CABLE RANGE:6-8 MM

Also available in orange by special order.

ORDER:

12400

 

Site Map